Navegando por Autor "Oliveira, Alexandre Barbosa de"
Agora exibindo 1 - 18 de 18
- Resultados por página
- Opções de Ordenação
Dissertação Anemômetro ultrassônico baseado em sensor de distância(Universidade Federal do Rio Grande do Norte, 2014-09-30) Silva, Alessandro Dionisio da; Feitosa, Carlos Chesman de Araújo; ; ; http://lattes.cnpq.br/7077917595324781; Araújo, José Humberto de; ; http://lattes.cnpq.br/2455132422249405; Oliveira, Alexandre Barbosa de; ; http://lattes.cnpq.br/0832037849525983; Gonçalves, Charlie Salvador; ; http://lattes.cnpq.br/9064755417050889Neste trabalho é desenvolvido um estudo para verificar a utilização do sensor de distância ultrassônico na medida da velocidade do vento. O vento é uma variável meteorológica importante para o estudo da dinâmica da atmosfera, mudanças no clima e plantações agrícolas. Com isso se faz necessário avanços em estudos que possibilitem cada vez mais a caracterização do comportamento do vento. Atualmente existem diversos tipos de anemômetros para medir velocidade do vento, entre os quais se destaca o anemômetro ultrassônico devido à precisão nas medidas. Porém este dispositivo possui um alto custo dificultando a utilização do mesmo. Sendo assim buscamos baixar o custo do anemômetro ultrassônico, realizando um estudo a cerca da utilização do sensor de distância no desenvolvimento de um anemômetro ultrassônico. Neste tipo de anemômetro a velocidade do vento é aferida com base no tempo de trânsito do pulso ultrassônico, mesma técnica presente nos sensores de distância para medidas de espaço. Aqui foram feitas diversas montagens buscando a melhor configuração a qual pudéssemos utilizar o sensor de distância para mensurar a velocidade do vento. Arranjos com anteparo e transdutores separados são exemplos, de montagens trabalhadas que serão detalhadas no capítulo 3. Com as medidas coletadas (sem e com vento) foram gerados histogramas, que mostram a distribuição dos registros de tempo de trânsito da onda sonora para cada caso. Duas das configurações estudadas apontam resultados favoráveis quanto ao uso do sensor de distância na medida da velocidade do vento.Artigo Angular dependence of hysteresis shift in oblique deposited ferromagnetic/ antiferromagnetic coupled bilayers(AIP Publishing LLC, 2014-07-17) Oliveira, Alexandre Barbosa de; Rodrigues-Suarez, R. L.; Michea, S.; Vega, H.; Azevedo, A.; Rezende, S. M.; Aliagla, Carolina; Denardin, J.The angular dependence of the hysteresis shift has been investigated in ferromagnetic/antiferromagnetic (NiFe/IrMn) bilayers grown by oblique deposition under the influence of a static magnetic field applied perpendicular to the uniaxial anisotropy direction induced during the growth process. It was found that at low oblique deposition angles, the unidirectional anisotropy field is much greater than the uniaxial anisotropy field and the corresponding anisotropies directions are noncollinear. In these conditions, the angular dependence of the hysteresis loop shift exhibits the well know cosine like shape but demanding a phase shift. Contrary to this, at high oblique deposition angle (70), the uniaxial anisotropy plays the fundamental role and the anisotropies directions are collinear. In this case, the exchange bias displays a jump phenomenon. The numerical calculations are consistent with the experimental data obtained from magneto-optical Kerr effect and ferromagnetic resonance.Artigo Angular dependence of hysteresis shift in oblique deposited ferromagnetic/antiferromagnetic coupled bilayers(AIP Publishing LLC, 2014-07-17) Oliveira, Alexandre Barbosa de; Suarez, Roberto Lazaro Rodriguez; Michea, Sebastián; Vega, Henrry Ariel; Costa, Antônio Azevedo da; Rezende, Sérgio Machado; Aliagla, Carolina; Denardin, JulianoThe angular dependence of the hysteresis shift has been investigated in ferromagnetic/antiferromagnetic (NiFe/IrMn) bilayers grown by oblique deposition under the influence of a static magnetic field applied perpendicular to the uniaxial anisotropy direction induced during the growth process. It was found that at low oblique deposition angles, the unidirectional anisotropy field is much greater than the uniaxial anisotropy field and the corresponding anisotropies directions are noncollinear. In these conditions, the angular dependence of the hysteresis loop shift exhibits the well know cosine like shape but demanding a phase shift. Contrary to this, at high oblique deposition angle (70 ), the uniaxial anisotropy plays the fundamental role and the anisotropies directions are collinear. In this case, the exchange bias displays a jump phenomenon. The numerical calculations are consistent with the experimental data obtained from magneto-optical Kerr effect and ferromagnetic resonanceArtigo Critical thickness investigation of magnetic properties in exchange-coupled bilayers(American Physical Society, 2011) Suarez, Roberto Lazaro Rodriguez; Leão, Luis Henrique Vilela; Oliveira, Alexandre Barbosa de; Almeida, Jairo Rolim Lopes de; Landeros, Pedro; Rezende, Sergio Machado; Costa, Antonio Azevedo daWe present a systematic investigation of the magnetic properties of two series of polycrystalline ferromagneticantiferromagnetic bilayers (FM-AF) of Ni81Fe19(10nm)/Ir20Mn80(tAF) grown by dc magnetron sputtering. One series was grown at an oblique angle of 50◦ and the other one was grown at 0◦. Ferromagnetic resonance (FMR) was used to measure the exchange bias field HE, the rotatable anisotropy field HRA, and the FMR linewidth H as a function of the antiferromagnetic layer thickness tAF. Three relaxation channels due to isotropic Gilbert damping, anisotropic two-magnon scattering, and mosaicity effects are simultaneously distinguished through the angular dependence of the FMR linewidth. In the regime of small IrMn layer thicknesses, not enough to establish the exchange bias anisotropy, the FMR linewidth shows a sharp peak due to the contribution of the two-magnon scattering mechanism. The results presented here are of general importance for understanding the dynamics of magnetization in the FM-AF structuresArtigo Critical thickness investigation of magnetic properties in exchange-coupled bilayers(American Physical Society, 2011-06-24) Oliveira, Alexandre Barbosa de; Rodrigues-Suárez, R. L.; Vilela-Leão, L. H.; Bueno, T.; Almeida, J. R. L.; Landeros, P.; Rezende, S. M.; Azevedo, A.We present a systematic investigation of the magnetic properties of two series of polycrystalline ferromagneticantiferromagnetic bilayers (FM-AF) of Ni81Fe19(10nm)/Ir20Mn80(tAF) grown by dc magnetron sputtering. One series was grown at an oblique angle of 50◦ and the other one was grown at 0◦. Ferromagnetic resonance (FMR) was used to measure the exchange bias field HE, the rotatable anisotropy field HRA, and the FMR linewidth H as a function of the antiferromagnetic layer thickness tAF. Three relaxation channels due to isotropic Gilbert damping, anisotropic two-magnon scattering, and mosaicity effects are simultaneously distinguished through the angular dependence of the FMR linewidth. In the regime of small IrMn layer thicknesses, not enough to establish the exchange bias anisotropy, the FMR linewidth shows a sharp peak due to the contribution of the two-magnon scattering mechanism. The results presented here are of general importance for understanding the dynamics of magnetization in the FM-AF structures.Dissertação Efeito Kerr magneto-óptico; Ressonância ferromagnética; Acoplamento bilinear; Acoplamento biquadrático(Universidade Federal do Rio Grande do Norte, 2012-02-17) Silva, Edimilson Félix da; Oliveira, Alexandre Barbosa de; ; ; http://lattes.cnpq.br/8896961475470345; Corrêa, Marcio Assolin; ; http://lattes.cnpq.br/2531075321550052; Rodriguez, Roberto LázaroNesta dissertação investigamos as propriedades magnéticas de um filme monocristalino de ferro e tricamadas com a composição Fe(80Å)/Cr(t)/Fe(80Å), variando as espessuras da camada metálica não magnética separadora (Cr) entre 9Å < t < 40Å. As amostras foram depositadas pela técnica Sputtring DC sobre substrato de óxido de Magnésio (MgO) com orientação cristalina (100). Para esta investigação foram utilizadas as técnicas experimentais de magnetometria por efeito Kerr Magneto-Óptico (MOKE) e Ressonância Ferromagnética (FMR). Estas técnicas permitiram o estudo das propriedades estáticas e dinâmicas da magnetização das multicamadas. Os resultados experimentais foram interpretados com base no modelo fenomenológico que leva em consideração os termos mais relevantes da energia livre magnética para descrever o comportamento do sistema. Para o filme monocristalino de ferro, realizamos uma discussão analítica das informações das curvas de magnetização e desenvolvemos uma simulação numérica baseada no modelo de Stoner-Wohlfarth, possibilitando o ajuste numérico das curvas de magnetização experimentais e a obtenção do valor de campo de anisotropia. Para as tricamadas, analisamos a presença dos acoplamentos bilinear e biquadrático entre as magnetizações das camadas ferromagnéticas adjacentes a partir das medidas das curvas de magnetização. Com as dependências angulares do campo de FMR e da largura de linha obtivemos informações sobre as anisotropias presentes nas tricamadas e evidenciamos os efeitos de diversos mecanismos de relaxação magnética. Também foi possível observar a dependência da epitaxia das multicamadas com os parâmetros de crescimento do Sputtering. Adicionalmente foi desenvolvida, durante o período do mestrado, a técnica de susceptibilidade magnética AC com o objetivo de obter resultados inovadores na investigação de filmes finos magnéticosArtigo Effects of second order surface anisotropy in YIG sputtered onto GGG (1 0 0) oriented substrate(Elsevier B.V., 2018-08-17) Oliveira, Alexandre Barbosa de; Feitosa, Carlos Chesman de Araújo; Rodríguez-suárez, R. L.; Costa, R. B.; Silva, U. C.; Costa, N. P.; Silva, B. G.; Sommer, R. L.; Bohn, Felipe; Correa, M. A.In this work, we produced Y3Fe5O12 textured films, with thicknesses between 50 nm and 500 nm, onto (1 0 0) Gd3Ga5O12 by magnetron sputtering and post annealing, and investigated the first and second order surface and cubic anisotropy constants using the ferromagnetic resonance technique. The surface anisotropy constants exhibited different behaviors with film thickness, with the first order presenting the usual inverse of ferromagnetic layer thickness. Besides this inverse of thickness behavior, the second order also came up with a constant value. In the frame of spin reorientation transition phenomenon, we evaluated volume and surface contribution to the surface anisotropy. Although the second order cubic anisotropy constant is one order of magnitude stronger than the first order, they did not show any explicit thickness dependence. The second order terms of surface and cubic anisotropy appeared to be essential to allow simultaneous fit of in-plane and out-of-plane angular dependence of resonance field. Moreover, they had to be negative to describe the out-of-plane results correctly. Our results raised critical issues that shall be taken into account when explaining the new and recent spintronics and caloritronics effects in YIG.Tese Filmes nanométricos de FeN e ALN crescidos por sputtering e aplicações do efeito peltier(Universidade Federal do Rio Grande do Norte, 2010-12-17) Moura, José Américo de Sousa; Feitosa, Carlos Chesman de Araújo; ; http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780822J1; ; http://lattes.cnpq.br/8017958494166961; Silva, Antônio Ferreira da; ; Silva, Ilde Guedes da; ; http://lattes.cnpq.br/3105492463780578; Corrêa, Marcio Assolin; ; http://lattes.cnpq.br/2531075321550052; Oliveira, Alexandre Barbosa de;Neste trabalho será mostrado a habilidade da técnica de sputtering (dc/rf) reativo/não-reativo a baixa potência para o crescimento de filmes nanométricos de materiais magnéticos (FeN) e semicondutores de gap largo (AlN) assim como a aplicação tecnológica do efeito peltier por módulos comerciais de Telureto de Bismuto (Bi2Te3). De grande interesse tecnológico para indústria de gravação magnética de altas densidades o sistema FeN apresenta um dos mais altos momentos magnéticos, entretanto a diversidade de fases formadas torna-o ainda, de difícil controle as suas propriedades magnéticas para produção de dispositivos. Neste trabalho foi investigado a variação destas propriedades por ressonância ferromagnética, MOKE e microscopia de força atômica (AFM) em função da concentração de nitrogênio na mistura gasosa do crescimento reativo. O Nitreto de Alumínio, enquadrado nos semicondutores de gap largo e de grande interesse na indústria eletrônica e optoeletrônica foi crescido em filmes nanométricos, de modo inédito, com boa qualidade estrutural a partir de alvo puro de AlN por sputtering rf não-reativo a baixa potência (~50W). Outra verificação deste trabalho é que o longo tempo de deposição para este material, pode levar a contaminação dos filmes por materiais adsorvidos nas paredes da câmara de deposição. A investigação por EDX mostra a presença de contaminantes magnéticos, provenientes de deposições anteriores, leva os filmes semicondutores de AlN crescidos a apresentarem magnetoresistência com resistividade alta. O efeito peltier aplicado nas células compactas de refrigeração disponíveis comercialmente e eficientes para resfriamento de pequenos volumes foi aplicada na criação de uma adega refrigerada disponibilizado para a indústria local como inovação tecnológica com registro de patenteArtigo Magnetization reversal in single ferromagnetic rectangular nanowires(IOP Publishing, 2010) Oliveira, Alexandre Barbosa de; Silva, Gilvânia Lucia da; Rezende, Sergio Machado; COSTA, Antonio Azevedo daWe report on the magnetoresistance (MR) investigation of the magnetization reversal processes in single rectangular nanowire of Permalloy. A set of nanowires with lengths ranging from 6 to 20 μm, thicknesses fixed in 10 nm, and widths between 250 nm and 1.2 μm, was fabricated by means of AFM local anodic oxidation lithography. Magnetoresistive hysteresis loops show an abrupt jump corresponding to the magnetization reversal that depends on the angle between the wire axis and the applied magnetic field direction. The field value corresponding to the abrupt jump of the MR was associated to the nucleation field deduced from the Brown equations. By the angular dependence of this magnetization reversal field we were able to identify the nucleation mode as the magnetization buckling. We have investigated the temperature dependence of the switching field as well as its stochastic nature as a function of the in-plane angleArtigo Magnetization reversal in single ferromagnetic rectangular nanowires(IOP Publishing, 2010-01-01) Oliveira, Alexandre Barbosa de; Silva, Gilvania l.; Rezende, Sergio m.; Azevedo, AntonioWe report on the magnetoresistance (MR) investigation of the magnetization reversal processes in single rectangular nanowire of Permalloy. A set of nanowires with lengths ranging from 6 to 20 µm, thicknesses fixed in 10 nm, and widths between 250 nm and 1.2 µm, was fabricated by means of AFM local anodic oxidation lithography. Magnetoresistive hysteresis loops show an abrupt jump corresponding to the magnetization reversal that depends on the angle between the wire axis and the applied magnetic field direction. The field value corresponding to the abrupt jump of the MR was associated to the nucleation field deduced from the Brown equations. By the angular dependence of this magnetization reversal field we were able to identify the nucleation mode as the magnetization buckling. We have investigated the temperature dependence of the switching field as well as its stochastic nature as a function of the in-plane angle.Tese Magnetorresistência perturbativa e estudo de fenômenos da caloritrônica de Spin em nanoestruturas magnéticas(2019-06-07) Costa, Ricardo Borges da; Oliveira, Alexandre Barbosa de; ; ; Anselmo, Dory Helio Aires de Lima; ; Correa, Márcio Assolin; ; Feitosa, Carlos Chesman de Araújo; ; Soares, João Maria; ; Suarez, Roberto Lázaro Rodriguez;Neste trabalho foram realizados estudos em filmes finos magnéticos com o objetivo de abordar duas linhas de investigação: (a) entendimento do mecanismo de interação em bicamadas acopladas do tipo ferromagnética/antiferromagnética (FM/AF). Neste caso as anisotropias rotatória e unidirecional (Exchange bias) foram investigadas com uma nova técnica experimental de caracterização magnética, que permite testar os modelos teóricos usados para explicar os fenômenos decorrentes dessas anisotropias. Esta técnica recebeu o nome de magnetorresistência perturbativa (PMR) e foi desenvolvida e aprimorada durante o doutorado. Investigou-se também, com uso da PMR, filmes simples com anisotropias uniaxial e cúbica [100]. Dois tipos de medidas de PMR foram empregadas na caracterização magnética: a medida de PMR em função do módulo do campo magnético aplicado na amostra e a medida de PMR em função da variação do ângulo de aplicação desse campo magnético (PMR angular). A outra linha de investigação, (b) envolve o controle e o entendimento da geração/detecção de corrente de spin a partir de gradiente de temperatura. Neste caso, uma montagem experimental foi desenvolvida para aplicar gradiente de temperatura perpendicular ao plano do filme magnético. Como consequência, efeitos clássicos e quânticos são responsáveis por gerar diferença de potencial na superfície do filme e que pode ser medida através de um nanovoltímetro. A detecção de corrente de spin a partir de diferença de potencial elétrico necessita de uma engenharia de filme fino, pois a corrente pura de spin não gera diferença de potencial elétrico. Neste trabalho será detalhado como é possível detectar diferença de potencial elétrico devido à corrente de spin. O parâmetro que caracteriza a eficiência da conversão de corrente de spin em corrente de carga (voltagem) é de grande importância para a engenharia de futuros dispositivos baseados em corrente de spin. Particularmente neste trabalho foram realizados esforços para caracterizar a eficiência de materiais ferromagnéticos, uma vez que na literatura são utilizados materiais não-magnéticos como a platina (Pt) e o tântalo (Ta). Além disso, realizou-se um estudo a respeito da geração e detecção de corrente de spin em sistemas FM/AF/NM, onde caracterizou-se a influência da camada AF (NiO, nesse caso) sobre a voltagem medida na camada NM. Nessa investigação, verificou-se que para algumas espessuras de NiO, há uma amplificação da corrente de spin no sistema.Artigo Perturbative measurement of magnetoresistance(AIP Publishing, 2018-12-21) Oliveira, Alexandre Barbosa de; Melo, A. C. C.; Costa, R. B.; Costa, N. P.; Azevedo, A.; Feitosa, Carlos Chesman de AraújoIn this paper, we report the development of a novel technique in which the magnetoresistance of nanostructures is perturbatively measured by transversally modulating the DC magnetic field. It measures the electrical transport counterpart of the transverse magnetic AC-susceptibility. The technique was developed in a conventional four-probe configuration in which a small DC current flows through the sample and a small transverse AC-field perturbates the equilibrium position of the sample magnetization. Lock-in detection, in-phase with the AC-perturbation, is used to measure the voltage signal between the two inner electrodes of the four-probe station. We successfully demonstrated that this signal is proportional to the product of the first derivative of sample resistance with respect to the equilibrium position of the magnetization times the second derivative of the energy with respect to the equilibrium position of the magnetization. These dependences add new features to the technique investigated here that were not captured by the investigations previously reported on the same subject. To show the effective use of the technique, we discuss its application in measuring magnetic properties of thin magnetic films in the non-saturated regime.Tese Produção e estudo de multicamadas magnéticas em substrato flexível(Universidade Federal do Rio Grande do Norte, 2015-08-28) Silva, Ubiratan Correia; Oliveira, Alexandre Barbosa de; Feitosa, Carlos Chesman de Araújo; ; http://lattes.cnpq.br/1150673024968512; ; http://lattes.cnpq.br/0832037849525983; ; http://lattes.cnpq.br/3525217951460486; Gonçalves, Charlie Salvador; ; http://lattes.cnpq.br/9064755417050889; Torres, Marco Antonio Morales; ; http://lattes.cnpq.br/0091292234916055; Souza, Thatyara Freire de; ; http://lattes.cnpq.br/8483112335128610Multicamadas magnéticas são a base para a produção de dispositivos spintrônicos e possuir o domínio na produção de tais multicamadas é fundamental para obter avanços nesta área, e nos últimos anos está em destaque a produção de dispositivos spintrônicos flexíveis. Devido a essa tendência, o objetivo do presente trabalho é produzir multicamadas magnéticas depositadas em substrato flexível utilizando a técnica de Magnetron sputtering dc. Três conjuntos de amostras foram confeccionados. O primeiro conjunto, constituído de tricamadas do tipo CoFe=Cu(t)=CoFe com diferentes espessuras do espaçador metálico. O Segundo conjunto, composto por dois subgrupos de multicamadas CoFe=Cu com a presença do IrMn como buffer layer ou cap layer. O terceiro conjunto, constituído por multicamadas de Permalloy (Py=Ta e Py=Ag) em substrato da Kapton e substrato de vidro. Para a investigação das propriedades magnéticas, foram realizadas medidas de magnetometria de amostra vibrante, ressonância ferromagnética e magnetoimpedância (MI). Todas executadas em temperatura ambiente e com campo magnético aplicado sempre no plano da amostra. Para a análise estrutural, a técnica de difração de raios-X foi usada. Os resultados das tricamadas mostraram a apresença de uma anisotropia uniaxial, para a amostra com espaçador de 4;2 nm. Para a multicamada com a presença do IrMn entre a camada buffer e FM, os resultados das propriedades magnéticas estáticas e dinâmicas apresentaram comportamento isotrópico. Para a multicamada com a presença do IrMn entre a camada FM e a cap layer, os resultados das propriedades magnéticas estáticas apresentaram o comportamento magnético de uma estrutura tipo válvula de spin. Entretanto houve uma divergência com resultados das medidas de ressonância ferromagnética, a qual foi justificada devido à contribuição dos grãos instáveis e estáveis para a anisotropia rodável e anisotropia de polarização (Exchange bias) na interface ferromagnética-antiferromagnética. Para a terceira série de amostras, os resultados apresentaram comportamentos semelhantes da MI cujo espaçador foi a prata (Ag), para ambos os substratos e variação significativa nas amostras com o espaçador por Ta onde foi possível associar a variação da magnetoimpedância entre os substratos de vidro e flexível, ao estresse compressivo na amostra de substrato flexível.Tese Propriedades termoelétricas de filmes nanométricos de ligas de telúrio, bismuto, selênio e antimônio produzidos por Magnetron sputtering DC(2017-09-14) Costa, Neymar Pereira da; Feitosa, Carlos Chesman de Araújo; ; ; Oliveira, Alexandre Barbosa de; ; Gonçalves, Charlie Salvador; ; Furtado, Cláudio Benedito Silva; ; Medeiros, Suzana Nóbrega de;A presente tese traz um método de produção de alvos semicondutores cujo material é proveniente de módulos termoelétricos comerciais. Os alvos têm a finalidade e foram utilizados em sistema magnetron sputtering. Os materiais que compõem os alvos são ligas ternárias semicondutoras, uma de telureto de bismuto e antimônio, que se caracteriza como tipo P e a outra ligada é um seleneto de bismuto e telúrio, cuja composição o caracteriza como tipo N. Estas ligas dos sistemas Bi2Te3-ySey e Bi2-xSbxTe3 apresentam propriedades termoelétricas de alto desempenho dentro da faixa de temperatura entorno da ambiente. A partir desses alvos, foram produzidos filmes termoelétricos de espessura nanométrica, em dois lotes, cujas amostras foram submetidas a tratamentos térmicos após sua produção. Foram investigadas as propriedades termoelétricas dos filmes, à temperatura ambiente, no sistema de medidas de propriedades físicas, o PPMS. Para isso foi utilizado a opção de transporte térmico TTO, o qual possibilita a aquisição de dados de grandezas físicas como o coeficiente Seebeck α, a condutividade térmica κ e a resistividade elétrica ρ. Com essas grandezas reunidas, foi calculado o Fator de Potência e a Figura de Mérito que é um fator adimensional que determina o quanto o material é promissor para aplicações em conversão de energia e refrigeração termoelétrica. Medidas de voltagem por corrente pelo método quatro pontas colinear, foram realizadas e mostraram um indicativo de utilização para o semicondutor tipo P como sensor de chaveamento térmico. Uma importante perspectiva é o desenvolvimento de um substrato, utilizando os filmes como termoelementos planares e assim, funcionar como dispositivo termoelétrico, capaz de promover gradientes térmicos em aplicações a outros sistemas como os magneto galvanométricos.Artigo Rotatable anisotropy on ferromagnetic/antiferromagnetic bilayer investigated by Brillouin light scattering(AIP Publishing, 2018-01-23) Oliveira, Alexandre Barbosa de; Rodrigues-Suarez, R. L.; Estrada, F.; Maior, D. S.; Arana, M.; Santos, O. Alves; Azevedo, A.; Rezende, S. M.The nature of the rotatable anisotropy in ferromagnetic/antiferromagnetic (FM/AF) NiFe/IrMn bilayers has been investigated using magneto-optical Kerr effect magnetometry, ferromagnetic resonance, and Brillouin Light Scattering (BLS) techniques. The behavior of the magnon frequencies with an external magnetic field applied in the bilayer plane has been measured by BLS. The angular dependence of magnon frequency shows a shift when compared to numerical calculation for different magnetic field intensities. This frequency shift can be associated with the rotatable anisotropy and it depends on the magnetic field intensity. As a result, the rotatable anisotropy field exhibits a non-monotonic dependence on the applied field. The results are interpreted considering the coexistence of parallel and antiparallel coupling at the FM/AF interface.Artigo Submicron fabrication by local anodic oxidation of germanium thin films(IOP PUBLISHING, 2009-08-04) Oliveira, Alexandre Barbosa de; Ribeiro, Gilberto Medeiros; Costa, Antonio Azevedo daHere we describe a lithography scheme based on the local anodic oxidation of germanium film by a scanning atomic force microscope in a humidity-controlled atmosphere. The oxidation kinetics of the Ge film were investigated by a tapping mode, in which a pulsed bias voltage was synchronized and applied with the resonance frequency of the cantilever, and by a contact mode, in which a continuous voltage was applied. In the tapping mode we clearly identified two regimes of oxidation as a function of the applied voltage: the trench width increased linearly during the vertical growth and increased exponentially during the lateral growth. Both regimes of growth were interpreted taking into consideration the Cabrera–Mott mechanism of oxidation applied to the oxide/Ge interface. We also show the feasibility of the bottom-up fabrication process presented in this work by showing a Cu nanowire fabricated on top of a silicon substrate.Artigo Theoretical and experimental study of Fe/Cr nanometric quasiperiodic multilayers(Solid State Communications, 2010-11-21) Souza, Thatyara Freire de; Gonçalves, Charlie Salvador; Corrêa, Marcio Assolin; Feitosa, Carlos Chesman de Araújo; Oliveira, Alexandre Barbosa de; Bohn, Felipe; Bezerra, Claudionor GomesAn experimental and theoretical study of magnetization curves of Fe/Cr nanometric magnetic films grown with the structure of the quasiperiodic Fibonacci sequence is presented. Fe ferromagnetic films with interfilm exchange coupling provided by intervening Cr non-ferromagnetic layers were grown on MgO (100) by dc magnetron sputtering at 300 ◦C. The magnetization curves were investigated using the magneto-optical Kerr effect with the external field applied along the easy axis. The theoretical approach for this system is based on a realistic phenomenological model that includes the following contributions to free magnetic energy: Zeeman, cubic magneto-crystalline anisotropy, as well as bilinear and biquadratic exchange energies. Our numerical results are in very good agreement with the experimental dataArtigo Theoretical and experimental study of Fe/Cr nanometric quasiperiodic multilayers(Elsevier, 2010-11-21) Souza, Thatyara Freire de; Gonçalves, Charlie Salvador; Corrêa, Marcio Assolin; Bezerra, Claudionor Gomes; Feitosa, Carlos Chesman de Araújo; Oliveira, Alexandre Barbosa de; Bohn, FelipeAn experimental and theoretical study of magnetization curves of Fe/Cr nanometric magnetic films grown with the structure of the quasiperiodic Fibonacci sequence is presented. Fe ferromagnetic films with interfilm exchange coupling provided by intervening Cr non-ferromagnetic layers were grown on MgO (100) by dc magnetron sputtering at 300 ◦C. The magnetization curves were investigated using the magneto-optical Kerr effect with the external field applied along the easy axis. The theoretical approach for this system is based on a realistic phenomenological model that includes the following contributions to free magnetic energy: Zeeman, cubic magneto-crystalline anisotropy, as well as bilinear and biquadratic exchange energies. Our numerical results are in very good agreement with the experimental data