Navegando por Autor "Nascimento, Leulomar Enedino do"
Agora exibindo 1 - 5 de 5
- Resultados por página
- Opções de Ordenação
Artigo Characterization and photocatalytic application of Ce4+, Co2+, Mn2+ and Ni2+ doped Fe3O4 magnetic nanoparticles obtained by the co-precipitation method(Elsevier, 2020-02-15) Andrade Neto, Nivaldo Freire de; Nascimento, Leulomar Enedino do; Corrêa, Marcio Assolin; Bohn, Felipe; Delmonte, Maurício Roberto Bomio; Motta, Fabiana Villela daIn this work, Ce4+, Co2+, Mn2+ and Ni2+ doped Fe3O4 nanoparticles were obtained by the co-precipitation method at 70 °C. The effects of the metal cations in the Fe3O4 lattice were investigated by X-ray diffraction (XRD), X-ray fluorescence (XRF), field emission scanning electron microscopy (SEM), nitrogen adsorption by the Brunauer-Emmett-Teller (BET) and UV–Visible (UV–Vis) spectroscopy. Magnetic properties were estimated by vibrating sample magnetometer (VSM) at room temperature and the electrical properties are studied through I–V curves. The photocatalytic properties were studied by the discoloration of the methylene blue (MB) dye. The reduction in the intensity of the diffraction peaks, followed by their enlargement, indicate that doping reduces the crystallite size of Fe3O4. Doping provided the reduction of the remaining magnetization, as the saturation magnetization increases, not being reached with 17 kOe. The electrical results indicate that only cobalt reduces the resistivity of Fe3O4, as manganese is the most increasing doping. Photocatalytic tests indicate that the defects generated by doping increase the photocatalytic activity of Fe3O4, being more expressive through doping with ceriumArtigo Characterization and photoluminescent, photocatalytic and antimicrobial properties of Boron-Doped TiO2 Nanoparticles Obtained by Microwave-Assisted Solvothermic Method(Springer, 2019-02-27) Andrade Neto, Nivaldo Freire de; Zanatta, Paolo; Nascimento, Leulomar Enedino do; Nascimento, Rubens Maribondo do; Delmonte, Maurício Roberto Bomio; Motta, Fabiana Villela daBoron doped TiO2:xB (x = 0 mol.%, 1 mol.%, 2 mol.%, 4 mol.% and 8 mol.%) was quickly synthesized by a microwave-assisted solvothermic method at 140C for 10 min. The nanoparticles obtained were characterized by x-ray diffraction (XRD), Fourier transform infrared spectroscopy, Raman spectroscopy, photoluminescence, field emission scanning electron microscopy, electron microscopy and diffuse optical reflectance. The photocatalytic properties were estimated against methylene blue dye. The antimicrobial activity was measured by the disc diffusion technique against S. aureus and E. coli bacteria. The XRD patterns show that there was no formation of secondary phases and that all the peaks correspond to the anatase phase of TiO2. Rietveld’s refinement showed that the addition of B3+ in the TiO2 lattice promotes a reduction in the size of the crystallites and this reduction it effectively increases the degradation capacity of the methylene blue dye, which after 50 min the 8%B sample degraded completely, while the pure TiO2 sample reduced its concentration by 95%. Boron-doped TiO2 was effective when reused and after the third cycle the photocatalytic activity of the powders was maintained. In addition, the incorporation of 8%B in the TiO2 lattice resulted in an increase from 8.66 mm to 15.61 mm and 9.04 mm to 13.65 mm in the inhibition halos of the S. aureus and E. coli bacteria, respectivelyDissertação Estudo da atividade fotocatalítica dos nanocompósitos TiO2- x%CeO2 e CeO2-x%TiO2 obtido pelo método hidrotérmico assistido por micro-ondas(2019-02-22) Nascimento, Leulomar Enedino do; Motta, Fabiana Villela da; ; ; Delmonte, Mauricio Roberto Bomio; ; Araújo, Vinícius Dantas de;O crescimento industrial acelerado aliado à expansão da agricultura vem causando preocupação com a geração de efluentes poluentes, sendo os métodos de tratamento dos mesmos, alvo de vários estudos para amenizar os danos causados por tais resíduos. Um método amplamente estudado é o Processo de Oxidação Avançada (POA), no qual visa o tratamento de efluentes orgânicos. Neste trabalho foram obtidos nanocompósitos a partir de óxido de titânio e óxido de cério, formando compostos CeO2-x%TiO2 e TiO2-x%CeO2, variando x = 10, 30 e 50 % mol. Os nanocompósitos foram sintetizados pelo método hidrotérmico assistido por micro-ondas, com posterior calcinação à 500°C, com o objetivo de investigar a atividade fotocatalítica através da degradação do corante azul de metileno sob radiação UV, comumente utilizado na indústria têxtil. Os compostos foram caracterizados pela técnica de difração de raios X (DRX), microscopia eletrônica de transmissão (MET), analisado a área superficial através do método BET (Brunauer, Emmett, Teller) e espectroscopia UV-Visível (UVVis). Os resultados de DRX mostraram formação das fases de TiO2 e CeO2, não havendo indicação de interação química entre os dois compostos. Com resultados de DRX e através do método de Scherrer, observou-se a influência da proporção molar dos óxidos nos tamanhos de cristalitos. Foi observado morfologias do tipo nanocubos e nanoesferas com diferentes níveis de aglomeração e tamanho médio de partícula que varia de 2 a 24 nm, além de apresentar área superficial específica que variaram de 20,24 à 62,80 m2 /g. Para o nanocompósito utilizando CeO2-x%TiO2, os compostos com x = 50% apresentaram melhores atividades fotocatalíticas, com degradação de aproximadamente 80% do corante. Dos compostos com TiO2 como matriz, o nanocompósito TiO2-x%CeO2 com x = 10% degradando todo o corante.Artigo Photocatalytic properties of the CeO2-xTiO2 and TiO2-xCeO2 (x = 10, 30 and 50 mol%) heterostructures obtained by a MAH(Wiley, 2020-06-18) Nascimento, Leulomar Enedino do; Andrade Neto, Nivaldo Freire de; Ramalho, Onécima Biatriz de Medeiros; Delmonte, Maurício Roberto Bomio; Motta, Fabiana Villela daIn this work, CeO2-TiO2 heterostructures were submitted to the microwave-assisted hydrothermal (MAH) method at 140 °C for 30 min, and varying the CeO2 and TiO2 percentages like 10, 30 and 50 mol%. The heterostructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller methodology (BET), and UV-Vis diffuse reflectance spectroscopy (UV-Vis). The photocatalytic were estimated varying the concentration of methylene blue dye (MB). The diffractograms indicate the formation of TiO2 anatase and CeO2 phases, without the formation of secondary phases. TEM images indicate the formation of nanocubes and nanospheres for CeO2 and TiO2, respectively. BET analysis indicates that CeO2 has the largest surface area (62.80 m2.g-1), and TiO2-10%CeO2 heterostructure has a low surface area (26.13 m2.g-1). The addition of TiO2 to CeO2 increases photocatalytic activity from 32 to 80 % for CeO2 and CeO2-50%TiO2, respectively. In contrast, the addition of CeO2 significantly decreases the photocatalytic activity of TiO2 from 98.9 to 50 % for TiO2 and TiO2-50%CeO2, respectively. Reuse tests showed that the TiO2-xCeO2 samples maintaining the photocatalytic response in subsequent cycles while the CeO2-xTiO2 samples have an increase in the responseTCC Revisão bibliográfica: processos de síntese e a eficiência de materiais fotocatalícos(2025-07-01) Nascimento, Leulomar Enedino do; Medeiros, Gilson Gomes de; http://lattes.cnpq.br/9423866978987831; http://lattes.cnpq.br/0885416124429512; Medeiros, Leonardo Gomes de; https://orcid.org/0009-0007-4948-1414; http://lattes.cnpq.br/2401519074185425; Silva, Otávio Lima da; https://orcid.org/0000-0002-6937-6159; http://lattes.cnpq.br/4758449600797954A fotocatálise é uma das propriedades que os semicondutores possuem devido à sua capacidade de excitação dos elétrons da camada de valência para a camada de condução ao ser excitado com uma fonte energética, como a luz solar. Esse trabalho aborda a propriedade fotocatalítica dos semicondutores e os avanços da tecnologia no processo de síntese. As técnicas de síntese estudadas foram o método sol-gel, método hidrotérmico assistido por micro-ondas, sonoquímico e electrospinning. De forma objetiva, esse trabalho abordou a capacidade de degradação de substâncias como corantes e variados remédios sob a exposição de luz UV-Vis em uma mistura contendo os semicondutores. Os artigos analisados apresentaram desempenho fotocatalítico consistente com os materiais-alvo utilizados. Foram investigados os corantes azul de metileno, alaranjado de metila e rodamina B, bem como a degradação de derivados do poliestireno e do princípio ativo do paracetamol, entre outros compostos. Os resultados demonstraram elevada eficiência, destacando-se uma taxa de degradação fotocatalítica de 100% para o paracetamol e de 88% para a carbamazepina, esta última um fármaco utilizado no tratamento da epilepsia.