Navegando por Autor "Dessi, João Guilherme"
Agora exibindo 1 - 1 de 1
- Resultados por página
- Opções de Ordenação
Artigo Assessing microstructures and mechanical resistances of as-atomized and as-extruded samples of Al-1wt%Fe-1wt%Ni alloy(Elsevier, 2017-01-15) Dessi, João Guilherme; Gomes, Leonardo Fernandes; Peres, Maurício Mirdhaui; Canté, Manuel Venceslau; Spinelli, José Eduardo; Silva, Bismarck LuizCurrent applications of Al–Fe–Ni alloys include Alnico permanent magnets, industrial furnaces, and cladding of nuclear fuel plates. In spite of industrial interest, limited knowledge regarding to inter-relations between microstructure and mechanical resistance can be noted to date. Thus, the aim of the present contribution is, firstly, to analyze the microstructure features of α-Al phase (size and morphology) during atomization of the ternary Al-1wt%Fe-1wt%Ni alloy, including determination of cooling rates and hardness of the obtained powders. Secondly, the nature, size and distribution of intermetallic compounds (IMC), strength and ductility of hot consolidated bulks by extrusion from two different ranges of Al-Fe-Ni powder size (powder size between 75 and 106 μm and powder size up 106 μm and less 180 μm) are examined. The sequence of processes includes nitrogen gas atomization followed by compaction and hot extrusion consolidation at both 350 °C and 400 °C. The procedures to characterize the samples involve X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), Vickers hardness and mechanical tensile tests. Al-rich cells prevailed for either smaller or larger Al-1wt%Fe-1wt%Ni atomized powders with formation of IMCs not only in the cell walls but also precipitated within the α-Al matrix. Strength and ductility of as-extruded samples are found to be consistent with their microstructures